Extracellular Electron Transfer Research Articles

Genetically dissecting the electron transport chain of a soil bacterium reveals a generalizable mechanism for biological phenazine-1-carboxylic acid oxidation.

The capacity for bacterial extracellular electron transfer via secreted metabolites is widespread in natural, clinical, and industrial environments. Recently, we discovered biological oxidation of phenazine-1-carboxylic acid (PCA), the first example of biological regeneration of a naturally produced extracellular electron shuttle. However, it remained unclear how PCA oxidation was catalyzed. Here, we report the mechanism, which we uncovered by genetically perturbing the branched electron transport chain (ETC) of the soil isolate Citrobacter portucalensis MBL. Biological PCA oxidation is coupled to anaerobic respiration with nitrate, fumarate, dimethyl sulfoxide, or trimethylamine-N-oxide as terminal electron acceptors. Genetically inactivating the catalytic subunits for all redundant complexes for a given terminal electron acceptor abolishes PCA oxidation. In the absence of quinones, PCA can still donate electrons to certain terminal reductases, albeit much less efficiently. In C. portucalensis MBL, PCA oxidation is largely driven by flux through the ETC, which suggests a generalizable mechanism that may be employed by any anaerobically respiring bacterium with an accessible cytoplasmic membrane. This model is supported by analogous genetic experiments during nitrate respiration by Pseudomonas aeruginosa.

Red-Light-Induced Genetic System for Control of Extracellular Electron Transfer.

Optogenetics is a powerful tool for spatiotemporal control of gene expression. Several light-inducible gene regulators have been developed to function in bacteria, and these regulatory circuits have been ported to new host strains. Here, we developed and adapted a red-light-inducible transcription factor for Shewanella oneidensis. This regulatory circuit is based on the iLight optogenetic system, which controls gene expression using red light. A thermodynamic model and promoter engineering were used to adapt this system to achieve differential gene expression in light and dark conditions within a S. oneidensis host strain. We further improved the iLight optogenetic system by adding a repressor to invert the genetic circuit and activate gene expression under red light illumination. The inverted iLight genetic circuit was used to control extracellular electron transfer within S. oneidensis. The ability to use both red- and blue-light-induced optogenetic circuits simultaneously was also demonstrated. Our work expands the synthetic biology capabilities in S. oneidensis, which could facilitate future advances in applications with electrogenic bacteria.

Isolation and Electrochemical Analysis of a Facultative Anaerobic Electrogenic Strain Klebsiella sp. SQ-1.

Electricigens decompose organic matter and convert stored chemical energy into electrical energy through extracellular electron transfer. They are significant biocatalysts for microbial fuel cells with practical applications in green energy generation, effluent treatment, and bioremediation. A facultative anaerobic electrogenic strain SQ-1 is isolated from sludge in a biotechnology factory. The strain SQ-1 is a close relative of Klebsiella variicola. Multilayered biofilms form on the surface of a carbon electrode after the isolated bacteria are inoculated into a microbial fuel cell device. This strain produces high current densities of 625 μA cm-2 by using acetate as the carbon source in a three-electrode configuration. The electricity generation performance is also analyzed in a dual-chamber microbial fuel cell. It reaches a maximum power density of 560 mW m-2 when the corresponding output voltage is 0.59 V. The facultative strain SQ-1 utilizes hydrous ferric oxide as an electron acceptor to perform extracellular electricigenic respiration in anaerobic conditions. Since facultative strains possess better properties than anaerobic strains, Klebsiella sp. SQ-1 may be a promising exoelectrogenic strain for applications in microbial electrochemistry.

Activated Carbon Application Simultaneously Alleviates Paddy Soil Arsenic Mobilization and Carbon Emission by Decreasing Porewater Dissolved Organic Matter.

Flooding of paddy fields during the rice growing season enhances arsenic (As) mobilization and greenhouse gas (e.g., methane) emissions. In this study, an adsorbent for dissolved organic matter (DOM), namely, activated carbon (AC), was applied to an arsenic-contaminated paddy soil. The capacity for simultaneously alleviating soil carbon emissions and As accumulation in rice grains was explored. Soil microcosm incubations and 2-year pot experimental results indicated that AC amendment significantly decreased porewater DOM, Fe(III) reduction/Fe2+ release, and As release. More importantly, soil carbon dioxide and methane emissions were mitigated in anoxic microcosm incubations. Porewater DOM of pot experiments mainly consisted of humic-like fluorophores with a molecular structure of lignins and tannins, which could mediate microbial reduction of Fe(III) (oxyhydr)oxides. Soil microcosm incubation experiments cospiking with a carbon source and AC further consolidated that DOM electron shuttling and microbial carbon source functions were crucial for soil Fe(III) reduction, thus driving paddy soil As release and carbon emission. Additionally, the application of AC alleviated rice grain dimethylarsenate accumulation over 2 years. Our results highlight the importance of microbial extracellular electron transfer in driving paddy soil anaerobic respiration and decreasing porewater DOM in simultaneously remediating As contamination and mitigating methane emission in paddy fields.

Enhanced anaerobic digestion of landfill leachate based on a novel redox mediator: Synergistic mechanism of enhancing extracellular electron transfer

The presence of recalcitrant compounds and toxic substances in landfill leachate results in low anaerobic digestion (AD) efficiency and poor methane production performance. Strengthening the extracellular electron transfer of microorganisms represents an effective approach to promote the AD of landfill leachate. In this study, a novel redox mediator (FeNC-RM) was synthesized through the combination of metal and non-metal doping, intensifying the stable operation of the landfill leachate AD system. Through characterization techniques including X-ray photoelectron spectroscopy and X-ray diffraction, it was observed that FeNC-RM possesses a larger specific surface area, abundant functional groups, and exceptional electrochemical performance. By adding FeNC-RM, the stability and efficiency of the medium-temperature AD system in the treatment of landfill leachate were improved: Obtained a high removal of chemical oxygen demand which was increased by 30 % compared to the control group and enhanced the specific methanogenic activity by 57.5 % compared to the control group. The electron transport system (ETS) activities of the experimental groups with the addition of RMs were all significantly higher than those of the control group, and the ETS activity of the sludge from the FeNC-RM group was 79.6 % higher than that of the control group. Through a comprehensive analysis of the underlying mechanism, it was determined that three aspects synergistically facilitated electron transfer: FeNC-RM, endowed with electrochemical capabilities, assumed a pivotal role in establishing a conduit for electron transport, thus promoting the synthesis of extracellular humic substances and augmenting electron transport activity. Furthermore, the microbial community was optimized by FeNC-RM, thereby fostering a co-nutritional mechanism between hydrolytic acidification bacteria and methanogens, establishing a direct interspecific electron transport pathway. In this study, an “endogenous + exogenous” electron transport model based on the enhanced extracellular electron transport pathway facilitated by FeNC-RM was proposed. This study offered valuable contributions to the advancement of anaerobic treatment technology for landfill leachate.

Enhancing Extracellular Electron Transfer of a 3D-Printed Shewanella Bioanode with Riboflavin-Modified Carbon Black Bioink.

3D printing of a living bioanode holds the potential for the rapid and efficient production of bioelectrochemistry systems. However, the ink (such as sodium alginate, SA) that formed the matrix of the 3D-printed bioanode may hinder extracellular electron transfer (EET) between the microorganism and conductive materials. Here, we proposed a biomimetic design of a 3D-printed Shewanella bioanode, wherein riboflavin (RF) was modified on carbon black (CB) to serve as a redox substance for microbial EET. By introducing the medicated EET pathways, the 3D-printed bioanode obtained a maximum power density of 252 ± 12 mW/m2, which was 1.7 and 60.5 times higher than those of SA-CB (92 ± 10 mW/m2) and a bare carbon cloth anode (3.8 ± 0.4 mW/m2). Adding RF reduced the charge-transfer resistance of a 3D-printed bioanode by 75% (189.5 ± 18.7 vs 47.3 ± 7.8 Ω), indicating a significant acceleration in the EET efficiency within the bioanode. This work provided a fundamental and instrumental concept for constructing a 3D-printed bioanode.

Biomineralized manganese oxide mediated nitrogen-contained wastewater treatment

In recent years, manganese (Mn) has emerged as an accelerator for nitrogen metabolism. However, the bioactivity of manganese is limited by the restricted contact between microbes and manganese minerals in the solid phase and by the toxicity of manganese to microbes. To enhance the bioactivity of solid-phase manganese, biomineralized manganese oxide (MnOx) modified by Lactobacillus was introduced. Nitrogen removal performance have confirmed the effective role of biomineralized MnOx in accelerating the removal of total inorganic nitrogen (TIN). Metagenomic analysis has confirmed the enhancement of the nitrogen metabolic pathway and microbial extracellular electron transfer (MEET) in biomineralized MnOx treatment group (BIOA group). Additionally, the enrichment of manganese oxidation and denitrification genus indicates a coupling between nitrogen metabolism and manganese metabolism. One point of views is that biomineralized MnOx-mediated nitrogen transformation processes could serve as a substitute for traditional nitrogen removal processes.

Lack of physiological evidence for cytochrome filaments functioning as conduits for extracellular electron transfer

ABSTRACT Extracellular cytochrome filaments are proposed to serve as conduits for long-range extracellular electron transfer. The primary functional physiological evidence has been the reported inhibition of Geobacter sulfurreducens Fe(III) oxide reduction when the gene for the filament-forming cytochrome OmcS is deleted. Here we report that the OmcS-deficient strain from that original report reduces Fe(III) oxide as well as the wild-type, as does a triple mutant in which the genes for the other known filament-forming cytochromes were also deleted. The triple cytochrome mutant displayed filaments with the same 3 nm diameter morphology and conductance as those produced by Escherichia coli heterologously expressing the G. sulfurreducens PilA pilin gene. Fe(III) oxide reduction was inhibited when the pilin gene in cytochrome-deficient mutants was modified to yield poorly conductive 3 nm diameter filaments. The results are consistent with the concept that 3 nm diameter electrically conductive pili (e-pili) are required for G. sulfurreducens long-range extracellular electron transfer. In contrast, rigorous physiological functional evidence is lacking for cytochrome filaments serving as conduits for long-range electron transport. IMPORTANCE Unraveling microbial extracellular electron transfer mechanisms has profound implications for environmental processes and advancing biological applications. This study on Geobacter sulfurreducens challenges prevailing beliefs on cytochrome filaments as crucial components thought to facilitate long-range electron transport. The discovery of an OmcS-deficient strain’s unexpected effectiveness in Fe(III) oxide reduction prompted a reevaluation of the key conduits for extracellular electron transfer. By exploring the impact of genetic modifications on G. sulfurreducens ’ performance, this research sheds light on the importance of 3-nm diameter electrically conductive pili in Fe(III) oxide reduction. Reassessing these mechanisms is essential for uncovering the true drivers of extracellular electron transfer in microbial systems, offering insights that could revolutionize applications across diverse fields.

Significance of a minor pilin PilV in biofilm cohesion of Geobacter sulfurreducens

Bacterial adhesion plays a vital role in forming and shaping the structure of electroactive biofilms that are essential for the performance of bioelectrochemical systems (BESs). Type IV pili are known to mediate cell adhesion in many Gram-negative bacteria, but the mechanism of pili-mediated cell adhesion of Geobacter species on anode surface remains unclear. Herein, a minor pilin PilV2 was found to be essential for cell adhesion ability of Geobacter sulfurreducens since the lack of pilV2 gene depressed the cell adhesion capability by 81.2 % in microplate and the anodic biofilm density by 23.1 % at −0.1 V and 37.7 % at −0.3 V in BESs. The less cohesiveness of mutant biofilms increased the charge transfer resistance and biofilm resistance, which correspondingly lowered current generation of the pilV2-deficient strain by up to 63.2 % compared with that of the wild-type strain in BESs. The deletion of pilV2 posed an insignificant effect on the production of extracellular polysaccharides, pili, extracellular cytochromes and electron shuttles that are involved in biofilm formation or extracellular electron transfer (EET) process. This study demonstrated the significance of pilV2 gene in cell adhesion and biofilm formation of G. sulfurreducens, as well as the importance of pili-mediated adhesion for EET of electroactive biofilm.

Impact of bioelectricity on DNRA process and microbial community composition within cathodic biofilms in dual-chambered bioelectrode microbial fuel cell (MFC)

The synchronous bioelectricity generation and dissimilatory nitrate reduction to ammonium (DNRA) pathway in Klebsiella variicola C1 was investigated. The presence of bioelectricity facilitated cell growth on the anodic biofilms, consequently enhancing the nitrate removal efficiency decreasing total nitrogen levels and causing a negligible accumulation of NO2– in the supernatant. Genomic analysis revealed that K. variicola C1 possessed a complete DNRA pathway and largely annotated electron shuttles. The up-regulated expression of genes narG and nirB, encoding nitrite oxidoreductase and nitrite reductase respectively, was closely associated with increased extracellular electron transfer (EET). High-throughput sequencing analysis was employed to investigate the impact of bioelectricity on microbial community composition within cathodic biofilms. Results indicated that Halomonas, Marinobacter and Prolixibacteraceae were enriched at the cathode electrodes. In conclusion, the integration of a DNRA strain with MFC facilitated the efficient removal of wastewater containing high concentrations of NO3– and enabled the environmentally friendly recovery of NH4+.

Shewanella oneidensis MR-1 coupled with biomass-derived carbon dots for promoted bioelectrochemical CO2 reduction: Mechanism elucidation of intensified energy metabolism

Bioelectrochemical CO2 reduction reaction (CO2RR) has been touted as one of the promising strategies to convert CO2 to high-value chemicals via the efficient microbial electrosynthesis (MES). However, the sluggish electron transfer efficiency between microbes and cathodes hampers the CO2 reduction efficiency. Herein, biomass-derived carbon dots (CDs) with high electrical conductivity were coupled with Shewanella oneidensis (S. oneidensis) MR-1 to construct a nanomaterial-bacterial biohybrid system to promote CO2-to-formate formation. Specifically, the corncob-derived CDs (cc-CDs) were highly-biocompatible with S. oneidensis MR-1, with such a constructed biohybrid system showing a marked formate titer of 0.50 mmol/L. Upon doping with Fe element, the resultant Fe-cc-CDs exhibited a considerably boosted formate titer of 1.22 mmol/L, which was 7.7 times higher than the pure S. oneidensis MR-1 system. Such significant CO2-to-formate conversion enhancement was contributed by the internalized CDs in S. oneidensis MR-1 stimulating extracellular electron transfer efficiency, therefore accelerating energy metabolism for formate bioelectrosynthesis. The intensified energy metabolism in S. oneidensis MR-1 was corroborated by the increased concentrations of ATP, NADH and overexpression of energy-related genes. This work demonstrates an intensified energy metabolism exemplification for CO2 reduction, which can be expanded to a host of different nanomaterials-internalized MES systems for bioelectrochemical implications.

Metagenomics revealing biomolecular insights into the enhanced toluene removal and electricity generation in PANI@CNT bioanode

Microbial fuel cells (MFCs) have significant potential for environmental remediation and energy recycling directly from refractory aromatic hydrocarbons. To boost the capacities of toluene removal and the electricity production in MFCs, this study constructed a polyaniline@carbon nanotube (PANI@CNT) bioanode with a three-dimensional framework structure. Compared with the control bioanode based on graphite sheet, the PANI@CNT bioanode increased the output voltage and toluene degradation kinetics by 2.27-fold and 1.40-fold to 0.399 V and 0.60 h−1, respectively. Metagenomic analysis revealed that the PANI@CNT bioanode promoted the selective enrichment of Pseudomonas, with the dual functions of degrading toluene and generating exogenous electrons. Additionally, compelling genomic evidence elucidating the relationship between functional genes and microorganisms was found. It was interesting that the genes derived from Pseudomonas related to extracellular electron transfer, tricarboxylic acid cycle, and toluene degradation were upregulated due to the existence of PANI@CNT. This study provided biomolecular insights into key genes and related microorganisms that effectively facilitated the organic pollutant degradation and energy recovery in MFCs, offering a novel alternative for high-performance bioanode.

The promotion of the atrazine degradation mechanism by humic acid in a soil microbial electrochemical system

The enhancing effects of anodes on the degradation of the organochlorine pesticide atrazine (ATR) in soil within microbial electrochemical systems (MES) have been extensively researched. However, the impact and underlying mechanisms of soil microbial electrochemical systems (MES) on ATR degradation, particularly under conditions involving the addition of humic acids (HAs), remain elusive. In this investigation, a soil MES supplemented with humic acids (HAs) was established to assess the promotional effects and mechanisms of HAs on ATR degradation, utilizing EEM-PARAFAC and SEM analyses. Results revealed that the maximum power density of the MES in soil increased by 150%, and the degradation efficiency of ATR improved by over 50% following the addition of HAs. Furthermore, HAs were found to facilitate efficient ATR degradation in the far-anode region by mediating extracellular electron transfer. The components identified as critical in promoting ATR degradation were Like-Protein and Like-Humic acid substances. Analysis of the microbial community structure indicated that the addition of HAs favored the evolution of the soil MES microbial community and the enrichment of electroactive microorganisms. In the ATR degradation process, the swift accumulation of Hydrocarbyl ATR (HYA) was identified as the primary cause for the rapid degradation of ATR in electron-rich conditions. Essentially, HA facilitates the reduction of ATR to HYA through mediated bonded electron transfer, thereby markedly enhancing the efficiency of ATR degradation.

Enhanced short-chain fatty acids production from food waste with magnetic biochar via anaerobic fermentation: Linking interfacial, extracellular, and intracellular electron transfer

Electron transfer is vital for microbial communities in anaerobic fermentation systems for food waste treatment. Considerable endeavors highlight the importance of interspecific electron transfer between acid-producing bacteria and methanogenic archaea. However, the contribution of electron transfer network from intracellular to extracellular in these microbes with conducive materials is unclear, and deserves more attention. This work demonstrated that magnetic biochar (as a typical conducive material) could enhance interfacial, extracellular and intracellular electron transfer networks during food waste fermentation, resulting in the improved production of short-chain fatty acids, accompanied by synchronous enhancements in solubilization, hydrolysis, and acidification steps. Further study revealed that magnetic biochar exhibited large surface area (28.5 m2/g) and high conductivity (97.6 μS/cm) with low charge transfer resistance and high catalytic activity, resulting in enriching acid-forming bacteria associated with electroactivity (e.g., Clostridium, Parabacteroides, and Fonticella). Also, magnetic biochar up-regulated the gene expressions involved in extracellular electron transfer, including membrane proteins (e.g., MtrA and MtrB) and conductive flagella (especially type IV pilus, e.g., PilA, PilB, and PilC), and intracellular electron transfer, particularly in the central pathway TCA cycle (e.g., acnA and sucA). In response to the evident stimulation of electron transfer networks (electron transport system activity increased by 204.1 % compared with the control), the critical gene expressions involved in fatty acid biosynthesis, requiring sufficient electrons and energy, were corresponding up-regulated (e.g., accA, accC, and accD), resulting in the promotion of short-chain fatty acids generation. This work would improve the in-depth understanding of electron transfer impacts on anaerobic systems and provide useful guidance for FW disposal.

Expression of filaments of the Geobacter extracellular cytochrome OmcS in Shewanella oneidensis.

The physiological role of Geobacter sulfurreducens extracellular cytochrome filaments is a matter of debate and the development of proposed electronic device applications of cytochrome filaments awaits methods for large-scale cytochrome nanowire production. Functional studies in G. sulfurreducens are stymied by the broad diversity of redox-active proteins on the outer cell surface and the redundancy and plasticity of extracellular electron transport routes. G. sulfurreducens is a poor chassis for producing cytochrome nanowires for electronics because of its slow, low-yield, anaerobic growth. Here we report that filaments of the G. sulfurreducens cytochrome OmcS can be heterologously expressed in Shewanella oneidensis. Multiple lines of evidence demonstrated that a strain of S. oneidensis, expressing the G. sulfurreducens OmcS gene on a plasmid, localized OmcS on the outer cell surface. Atomic force microscopy revealed filaments with the unique morphology of OmcS filaments emanating from cells. Electron transfer to OmcS appeared to require a functional outer-membrane porin-cytochrome conduit. The results suggest that S. oneidensis, which grows rapidly to high culture densities under aerobic conditions, may be suitable for the development of a chassis for producing cytochrome nanowires for electronics applications and may also be a good model microbe for elucidating cytochrome filament function in anaerobic extracellular electron transfer.

Engineering hybrid conductive electrochemically active biofilms enable efficient interfacial electron transfer and syntrophic carbon metabolism

Supply of carbon-based nanomaterials (e.g., carbon nanotubes, CNTs) to develop highly conductive electrochemically active biofilms (EABs) is a potential strategy for facilitating extracellular electron transfer (EET) in bioelectrochemical systems (BESs). Understanding of the underlying CNTs-mediated EET behaviors is helpful to further advance the practical application of BESs. Here, the cognitive influence of CNTs on bioelectrocatalytic activity and electron transfer efficiency of EABs were elucidated. CNTs can be embedded into EABs to form hybrid conductive biofilms (CNTs/EABs), achieving a high current density (7.4 ± 1.40 A m−2) and excellent coulombic recovery (46.0 ± 2.70 %) over 100 days of steady operation. The supply of CNTs can mitigate the dependence of exoelectrogens (such as Geobacter) on outer membrane cytochromes (OMCs) and conductive pili due to their down-regulated genes expression in CNTs/EABs, but it can significantly improve microbial carbon metabolism because physically high-conductive CNTs can establish rapid EET pathways, which may reduce the necessity for cells to invest metabolic energy in producing conductive pili and cytochromes that are required in the absence of CNTs. Such enhancement in electron transfer rate may be caused by the interfacial interaction between OMCs and CNTs, resulting in an order of magnitude higher than in the control (5.5 ± 1.60 s−1vs. 0.28 ± 0.04 s−1) and without compromising of mass diffusion. This study provides comprehensive insight into the role of carbon-based nanomaterials in provoking interfacial electron transfer and renewable energy recovery.

Hierarchical modulation of extracellular electron transfer processes in microbial fuel cell anodes for enhanced power output through improved Geobacter adhesion

Although microbial fuel cell (MFC) technology is nearing practical realization, the challenge of attaining higher power output continues to impede its widespread implementation. In this study, we successfully developed free-standing three-dimensional high-performance anode materials for MFCs using a straightforward "one-step" process based on garlic. The resulting anode not only promotes the accumulation of biomass and the enrichment of exoelectrogen Geobacter but also facilitates interfacial extracellular electron transfer. This led to rapid start-up within just three days, a robust power density of 12.37 W/m3, and an impressive 24.04 % coulombic efficiency in mixed-culture MFC reactors. Our investigation into the underlying mechanisms of exocellular electron transfer revealed improvements in both direct electron transfer and mediated electron transfer processes. Notably, the fabrication of carbonized garlic MFC anodes proves to be technically competitive and economically relevant. It not only paves the way for the development of high-performance MFCs but also provides valuable insights for the rational design of materials related to microbial electrochemical technologies.

Enhancing anammox process with granular activated carbon: A study on Microbial Extracellular Secretions (MESs)

Granular activated carbon (GAC), a porous carbon-based material, provides increased attachment space for functional microorganisms and enhances nitrogen removal by facilitating extracellular electron transfer in the anammox process. This study investigates the effects of GAC on the biosynthesis of microbial extracellular secretions (MESs) and explores the roles of these secretions in anammox activities. Four lab-scale reactors were operated: two downstream UASB reactors (D1 and D2) receiving effluents from the upstream UASB reactors (U1: no-GAC, U2: yes-GAC). Our results indicate that MESs were enhanced with the addition of GAC. The effluent from U2 exhibited a 59.62 % higher amino acid content than that from U1. These secretions contributed to an increase in the nitrogen loading rate (NLR) in the downstream reactors. Specifically, NLR in D1 increased from 130.5 to 142.7 g N/m3/day, and in D2, it escalated from 137.5 to 202.8 g N/m3/day, likely through acting as cross-feeding substrates or vital nutrients. D2 also showed increased anammox bacterial activity, enriched Ca. Brocadia population and hao gene abundance. Furthermore, this study revealed that D2 sludge has significantly higher extracellular polymeric substances (EPS) (48.71 mg/g VSS) and a larger average granule size (1.201 ± 0.119 mm) compared to D1 sludge. Overall, GAC-stimulated MESs may have contributed to the enhanced performance of the anammox process.

Electromagnetic Field Drives the Bioelectrocatalysis of γ-Fe2O3-Coated Shewanella putrefaciens CN32 to Boost Extracellular Electron Transfer.

The microbial hybrid system modified by magnetic nanomaterials can enhance the interfacial electron transfer and energy conversion under the stimulation of a magnetic field. However, the bioelectrocatalytic performance of a hybrid system still needs to be improved, and the mechanism of magnetic field-induced bioelectrocatalytic enhancements is still unclear. In this work, γ-Fe2O3 magnetic nanoparticles were coated on a Shewanella putrefaciens CN32 cell surface and followed by placing in an electromagnetic field. The results showed that the electromagnetic field can greatly boost the extracellular electron transfer, and the oxidation peak current of CN32@γ-Fe2O3 increased to 2.24 times under an electromagnetic field. The enhancement mechanism is mainly due to the fact that the surface modified microorganism provides an elevated contact area for the high microbial catalytic activity of the outer cell membrane's cytochrome, while the magnetic nanoparticles provide a networked interface between the cytoplasm and the outer membrane for boosting the fast multidimensional electron transport path in the magnetic field. This work sheds fresh scientific light on the rational design of magnetic-field-coupled electroactive microorganisms and the fundamentals of an optimal interfacial structure for a fast electron transfer process toward an efficient bioenergy conversion.

Denitrification reaction performance in three-dimensional biofilm electrode reactors using self-releasing carbon biofilm electrodes

Agricultural waste, corncobs, and sponge iron were used to develop a self-releasing carbon biofilm electrode (SRC-BE) and utilized for denitrification experiments in three-dimensional biofilm electrode reactors (3D-BERs). Fe2+ was released to enhance the extracellular electron transfer. Following an alkali treatment, SRC-BE were introduced into 3D-BERs of the electrode group (EG), with iron serving as the anode-cathode plate in the EG. Under a current density of 0.1 mA/cm2, hydraulic retention time of 2 h, and dissolved oxygen control at 0.5–1.0 mg/L, the removal rates were as follows: the highest removal rates were 71.09 % for total nitrogen, 40.26 % for NH4+-N, and 84.34 % for NO3−-N, with a stable 96.87 % removal rate for total phosphate. The effluent chemical oxygen demand in the EG remained stable at approximately 12 mg/L during the stable phase, thus reducing the risk of secondary pollution. The enrichment of electroactive microorganisms and functional genes related to C and N also verified their denitrification efficacy.